21,59 max 0,850 10,89 0,429 13,80 0,54 3,05 0,50 0,12 0,020 31,12 1,225 13,97 0,550 25,40 0,13 1,000 0,005 green 203407 green l3 ident. nr. no. code led led 2 links led 2 left led 1 right led 1 rechts 0,2 mm (0,008 inch) if not specified [in] top of pcb lp recommended panel cutout empfohlener frontplatten ausschnitt 32,22 0,20 1,269 0,008 14,89 0,586 0,38 0,10 0,015 0,004 housing: glass filled polyester ul 94 v-0 black shielding: cu alloy, plated with ni operating temperature: -40c to +85c terminal finish: sn matte contact finish: au, 0.8 m (30 in) over ni contacts: phosphor bronze materials and finish led lens: epoxy date 28.06.2012 b index mjim 8c10t,1x2,int.mag.,led aligned mod jack - mjim 203407 2:1 information: tolerances scale all dimensions in mm designation subject to modification without prior notice. drawing will not be updated. all rights reserved. only for information. to ensure that this is the latest version of this drawing, please contact one of the erni companies before using. www.erni.com class a3 copyright by erni gmbh proprietary notice pursuant to iso 16016 to be obse rved. i (1/2) note 1: one rear shield tab centered note 2: side ground tab rear of peg 3.05 mm (r) note 3: panel ground flanges both sides and top (gf5) led 2 led 1 1 3 5 7 2 4 6 8 1 3 5 7 2 4 6 8 1 8 8 1 schematic number: h3d01
0,89 0,07 x 16 0,035 0,003 1,60 0,07 x 3 0,063 0,003 3,25 0,07 x 2 0,128 0,003 1,02 0,07 x 8 0,040 0,003 25,40 1,000 12,70 0,500 2,54 0,100 2,73 0,107 1,27 0,050 2,73 0,107 0,76 0,030 2,54 0,100 9,65 0,380 13,21 0,520 23,62 0,930 2,29 0,090 4,06 0,160 3,05 0,120 8,89 0,350 10,16 0,400 2,54 0,10 10,16 0,40 date 28.06.2012 b index mjim 8c10t,1x2,int.mag.,led aligned mod jack - mjim 203407 2:1 information: tolerances scale all dimensions in mm designation subject to modification without prior notice. drawing will not be updated. all rights reserved. only for information. to ensure that this is the latest version of this drawing, please contact one of the erni companies before using. www.erni.com class a3 copyright by erni gmbh proprietary notice pursuant to iso 16016 to be obse rved. i (2/2) auto mdix compatible (p1-p2 : j1-j2) 1ct :1 3% (p3-p6 : j3-j6) 1ct : 1 3% n/c p7 0,2 mm (0,008 inch) if not specified [in] 11 12 109 12 109 11 2 4 6 8 1 3 5 7 2 4 6 8 1 3 5 7 recommended pcb layout - component side view empfohlenes leiterplatten-layout - bestckungsseite all tolerances 0.05 unless noted common mode rejection 60 - 100 mhz -35 db typ 30 - 60 mhz -40 db typ 0.1 - 30 mhz -50 db typ 0.1 mhz-100 mhz -1.1 db max ocl(100 khz, 0.1 v, 8 ma) (p1-p2 : p3-p6 350 h min dcr (p1-p2, p3-p6 1.1 ohms max turns ratio: 1ct:1ct 3% 0.5 mhz-30 mhz -18 db min isolation 1500 vrms 40 mhz -15.5 db min 50 mhz -13.6 db min 60 mhz-80 mhz -12 db min crosstalk: (0.1 mhz-100mhz -40 db typ magnetics specifications @ 25c insertion loss: return loss: 1000pf/2kv gnd p8 pcb ct p4 ct p5 p2 p6 p3 p1 4x 75 w j7,8 cable j2 j6 j3 j1 j4,5 elektrisches diagramm electrical schematic - 10/100 base tx - h3d01 extended temperature range 2.2 ma max green 2.5 10 led specifications led anweisung v f i 109 1211 farbe color typ v f f circuit diagram schaltskizze
|
